In-Store Pickup available
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
(1 of 1 customers found this review helpful)
Very sturdy, bad design for installation
By Sammy the great dane
from Glastonbury, Ct.
About Me Casual User
Comments about Generations 37" - 55" Full Motion TV Wall Mount - Black:
Very sturdy, design for mount to Sony 40 inch leaves you scratching your head. Your going to need at least two people to mount this, 3 would be better as you cannot attach bracket to TV and hang with out either putting in the lag bolts last, or juggle TV and attach it to bracket. Nuts are metric, and American. Please stick a needle in me eye. Lag bolts are not far enough away from swivel bracket and a good old American socket has a hard time screwing them in, as the socket gets interfered by the other bolts in the bracket. Screw holes require you be creative to complete installation. If you could attach half the bracket to the TV, and other half to wall with a quick pin to put in place for final mounting it would be a five star bracket. For the amount PC charges you for this it should be better suited for easier mounting. So if you like a bit of a challenge, and by a Sony 40incher have fun.
Bottom Line No, I would not recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
The 9846GC2 is an easy-to-use, large, full-motion mount, perfect for 37 – 55 inch TVs up to 80 pounds. It offers tilt, pan, swivel, and leveling for maximum viewing flexibility. The 9846GC2 has a low 3.2 inch mounting profile and is VESA compliant up to 600 x 400. It offers post-installation leveling of the mount and easy-to-use integrated cable management to guide wires, plus it comes with a manual, complete hardware kit, and adapters to make installation easy. Here's how:
To start, detach the VESA plate from the arm and set the arm assembly aside. Then attach the VESA plate with adapters, if needed, to the back of your TV and set the TV aside. Choose the location where you want to mount your TV and use a stud finder to find the stud. Once you find it, center the wall plate on the wall, make sure it's level, and mark you pilot holes. Remove the wall plate, drill holes, install the lag bolts, check for level, and secure the wall plate. Hang the TV on the mount. With the TV in place, secure it to the wall plate. Your TV is now securely mounted on the wall.
Now, sit back and enjoy the 9846GC2 full-motion mount.
Sign up for details
Receive all the latest offers and news fromP.C. Richard & Son!
Receive all the latest offers and news from P.C. Richard & Son!